Bezel Trays

Use this adhesive directly over artwork for a raised, glass-like finish. Thin it with water for a lacquer-like finish. It's mixable so you can create your own colors by adding a small amount of dye ink. Perfect for glitter.

Diamond Glaze Dimensional Adhesive. Use this adhesive directly over artwork for a raised glass-like finish. Thin it with water for a lacquer-like finish. It's mixable so you can create your own colors by adding a small amount of dye ink. Perfect for gluing glitter

A dimensional adhesive that dries to a clear, glass-like finish. It securely holds vellum, glass beads, glitter and many other mediums. Diamond Glaze is also mixable with dye-based inks, watercolors, pearlescent pigments and more.

8 oz

This set contains one Bezel setting made of metal alloy in a silver color, and a round 45mm glass cabochon that will fit into the tray.

You will need ribbon or string to hang your ornament, scissors, decorative paper, crafting glue, and diamond glaze to complete this project.

*** Diamond glaze is an important part of making these, so be sure to get it! One bottle will make at least ten ornaments, if not many more!

See out our tutorial for project ideas and directions on how to make these!

These bezel trays will hold glass cabochons with the corresponding size to the tray. See below for directions on how to use these with the cabochons.

Shape: Heart
Tray Size: 23mm x 21mm
Color: Antique Silver
Material: Metal Alloy
Number of Trays in Package: Four

Simply put a few dots of Diamond Glaze on the bottom of the glass cabochon, and press down firmly on the paper or other material you wish to use. Wipe any glue off the edge of the cabochon, and let dry for about 10 minutes.

Cut around the cabochon to remove the extra paper or other material.

Place a drop of glue in the bezel tray and set the cabochon into it. You can use a household glue such as tacky glue, or a much stronger glue such as E 6000 for uses such as magnets where the glass itself might be pulled on more than it would be with jewelry.

Allow to dry, and you are finished!

These bezel trays will hold glass cabochons with the corresponding size to the tray. See below for directions on how to use these with the cabochons.

Shape: Round
Tray Size: 12mm
Color: Platinum
Material: Metal Alloy
Number of Trays in Package: Four

Simply put a few dots of Diamond Glaze on the bottom of the glass cabochon, and press down firmly on the paper or other material you wish to use. Wipe any glue off the edge of the cabochon, and let dry for about 10 minutes.

Cut around the cabochon to remove the extra paper or other material.

Place a drop of glue in the bezel tray and set the cabochon into it. You can use a household glue such as tacky glue, or a much stronger glue such as E 6000 for uses such as magnets where the glass itself might be pulled on more than it would be with jewelry.

Allow to dry, and you are finished!

These bezel trays will hold glass cabochons with the corresponding size to the tray. See below for directions on how to use these with the cabochons.

Shape: Oval
Tray Size: 18x25mm
Color: Antique Bronze
Material: Metal Alloy
Number of Trays in Package: Four

Glass cabochons to match the tray size will need to be purchased separately.

How to make Glass Cabochon Settings for the Bezels

Simply put a few dots of Diamond Glaze on the bottom of the glass cabochon, and press down firmly on the paper or other material you wish to use. Wipe any glue off the edge of the cabochon, and let dry for about 10 minutes.

Cut around the cabochon to remove the extra paper or other material.

Place a drop of glue in the bezel tray and set the cabochon into it. You can use a household glue such as tacky glue, or a much stronger glue such as E 6000 for uses such as magnets where the glass itself might be pulled on more than it would be with jewelry.

Allow to dry, and you are finished!

Check out our blog post for a more thorough description along with photos.

These bezel trays will hold glass cabochons with the corresponding size to the tray. See below for directions on how to use these with the cabochons.

Shape: Square
Tray Size: 25mm
Color: Antique Bronze
Material: Metal Alloy
Number of Trays in Package: Four

Simply put a few dots of Diamond Glaze on the bottom of the glass cabochon, and press down firmly on the paper or other material you wish to use. Wipe any glue off the edge of the cabochon, and let dry for about 10 minutes.

Cut around the cabochon to remove the extra paper or other material.

Place a drop of glue in the bezel tray and set the cabochon into it. You can use a household glue such as tacky glue, or a much stronger glue such as E 6000 for uses such as magnets where the glass itself might be pulled on more than it would be with jewelry.

Allow to dry, and you are finished!

These bezel trays will hold glass cabochons with the corresponding size to the tray. See below for directions on how to use these with the cabochons.

Shape: Round
Tray Size: 25mm
Color: Platinum
Material: Metal Alloy
Number of Trays in Package: Four

Simply put a few dots of Diamond Glaze on the bottom of the glass cabochon, and press down firmly on the paper or other material you wish to use. Wipe any glue off the edge of the cabochon, and let dry for about 10 minutes.

Cut around the cabochon to remove the extra paper or other material.

Place a drop of glue in the bezel tray and set the cabochon into it. You can use a household glue such as tacky glue, or a much stronger glue such as E 6000 for uses such as magnets where the glass itself might be pulled on more than it would be with jewelry.

Allow to dry, and you are finished!

These bezel trays will hold glass cabochons with the corresponding size to the tray. See below for directions on how to use these with the cabochons.

Shape: Round
Tray Size: 30mm
Color: Platinum
Material: Metal Alloy
Number of Trays in Package: Four

Simply put a few dots of Diamond Glaze on the bottom of the glass cabochon, and press down firmly on the paper or other material you wish to use. Wipe any glue off the edge of the cabochon, and let dry for about 10 minutes.

Cut around the cabochon to remove the extra paper or other material.

Place a drop of glue in the bezel tray and set the cabochon into it. You can use a household glue such as tacky glue, or a much stronger glue such as E 6000 for uses such as magnets where the glass itself might be pulled on more than it would be with jewelry.

Allow to dry, and you are finished!

These bezel trays will hold glass cabochons with the corresponding size to the tray. See below for directions on how to use these with the cabochons.

Shape: Round
Tray Size: 25mm
Color: Antique Bronze
Material: Metal Alloy
Number of Trays in Package: Four

Simply put a few dots of Diamond Glaze on the bottom of the glass cabochon, and press down firmly on the paper or other material you wish to use. Wipe any glue off the edge of the cabochon, and let dry for about 10 minutes.

Cut around the cabochon to remove the extra paper or other material.

Place a drop of glue in the bezel tray and set the cabochon into it. You can use a household glue such as tacky glue, or a much stronger glue such as E 6000 for uses such as magnets where the glass itself might be pulled on more than it would be with jewelry.

Allow to dry, and you are finished!

These bezel trays will hold glass cabochons with the corresponding size to the tray. See below for directions on how to use these with the cabochons.

Shape: Round
Tray Size: 14mm
Color: Antique Bronze
Material: Metal Alloy
Number of Trays in Package: 2 pair

Simply put a few dots of Diamond Glaze on the bottom of the glass cabochon, and press down firmly on the paper or other material you wish to use. Wipe any glue off the edge of the cabochon, and let dry for about 10 minutes.

Cut around the cabochon to remove the extra paper or other material.

Place a drop of glue in the bezel tray and set the cabochon into it. You can use a household glue such as tacky glue, or a much stronger glue such as E 6000 for uses such as magnets where the glass itself might be pulled on more than it would be with jewelry.

Allow to dry, and you are finished!

These bezel trays will hold glass cabochons with the corresponding size to the tray. See below for directions on how to use these with the cabochons.

Shape: Link Heart Shape
Tray Size: 20mm x 20mm
Color: Antique Silver
Material: Metal Alloy
Number of Trays in Package: Eight

Simply put a few dots of Diamond Glaze on the bottom of the glass cabochon, and press down firmly on the paper or other material you wish to use. Wipe any glue off the edge of the cabochon, and let dry for about 10 minutes.

Cut around the cabochon to remove the extra paper or other material.

Place a drop of glue in the bezel tray and set the cabochon into it. You can use a household glue such as tacky glue, or a much stronger glue such as E 6000 for uses such as magnets where the glass itself might be pulled on more than it would be with jewelry.

Allow to dry, and you are finished!

These bezel trays will hold glass cabochons with the corresponding size to the tray. See below for directions on how to use these with the cabochons.

Shape: Round
Tray Size: ???? mm
Color: Antique Bronze
Material: Metal Alloy
Number of Trays in Package: 1

Simply put a few dots of Diamond Glaze on the bottom of the glass cabochon, and press down firmly on the paper or other material you wish to use. Wipe any glue off the edge of the cabochon, and let dry for about 10 minutes.

Cut around the cabochon to remove the extra paper or other material.

Place a drop of glue in the bezel tray and set the cabochon into it. You can use a household glue such as tacky glue, or a much stronger glue such as E 6000 for uses such as magnets where the glass itself might be pulled on more than it would be with jewelry.

Allow to dry, and you are finished!

These bezel trays will hold glass cabochons with the corresponding size to the tray. See below for directions on how to use these with the cabochons.

Shape: Round
Tray Size: 14mm
Color: Antique Bronze
Material: Metal Alloy
Number of Trays in Package: 4

Simply put a few dots of Diamond Glaze on the bottom of the glass cabochon, and press down firmly on the paper or other material you wish to use. Wipe any glue off the edge of the cabochon, and let dry for about 10 minutes.

Cut around the cabochon to remove the extra paper or other material.

Place a drop of glue in the bezel tray and set the cabochon into it. You can use a household glue such as tacky glue, or a much stronger glue such as E 6000 for uses such as magnets where the glass itself might be pulled on more than it would be with jewelry.

Allow to dry, and you are finished!

These bezel trays will hold glass cabochons with the corresponding size to the tray. See below for directions on how to use these with the cabochons.

Shape: Round
Tray Size: 25mm
Color: Gun Metal
Material: Metal Alloy
Number of Trays in Package: Four

Simply put a few dots of Diamond Glaze on the bottom of the glass cabochon, and press down firmly on the paper or other material you wish to use. Wipe any glue off the edge of the cabochon, and let dry for about 10 minutes.

Cut around the cabochon to remove the extra paper or other material.

Place a drop of glue in the bezel tray and set the cabochon into it. You can use a household glue such as tacky glue, or a much stronger glue such as E 6000 for uses such as magnets where the glass itself might be pulled on more than it would be with jewelry.

Allow to dry, and you are finished!

These bezel trays will hold glass cabochons with the corresponding size to the tray. See below for directions on how to use these with the cabochons.

Shape: Round
Tray Size: 12mm
Color: Antique Bronze
Material: Metal Alloy
Number of Trays in Package: 2 pair

Simply put a few dots of Diamond Glaze on the bottom of the glass cabochon, and press down firmly on the paper or other material you wish to use. Wipe any glue off the edge of the cabochon, and let dry for about 10 minutes.

Cut around the cabochon to remove the extra paper or other material.

Place a drop of glue in the bezel tray and set the cabochon into it. You can use a household glue such as tacky glue, or a much stronger glue such as E 6000 for uses such as magnets where the glass itself might be pulled on more than it would be with jewelry.

Allow to dry, and you are finished!

These bezel trays will hold glass cabochons with the corresponding size to the tray. See below for directions on how to use these with the cabochons.

Shape: Round
Tray Size: 30mm
Color: Antique Bronze
Material: Metal Alloy
Number of Trays in Package: Four

Simply put a few dots of Diamond Glaze on the bottom of the glass cabochon, and press down firmly on the paper or other material you wish to use. Wipe any glue off the edge of the cabochon, and let dry for about 10 minutes.

Cut around the cabochon to remove the extra paper or other material.

Place a drop of glue in the bezel tray and set the cabochon into it. You can use a household glue such as tacky glue, or a much stronger glue such as E 6000 for uses such as magnets where the glass itself might be pulled on more than it would be with jewelry.

Allow to dry, and you are finished!

These bezel trays will hold glass cabochons with the corresponding size to the tray. See below for directions on how to use these with the cabochons.

Shape: Square
Tray Size: 25mm
Color: Platinum
Material: Metal Alloy
Number of Trays in Package: Four

Simply put a few dots of Diamond Glaze on the bottom of the glass cabochon, and press down firmly on the paper or other material you wish to use. Wipe any glue off the edge of the cabochon, and let dry for about 10 minutes.

Cut around the cabochon to remove the extra paper or other material.

Place a drop of glue in the bezel tray and set the cabochon into it. You can use a household glue such as tacky glue, or a much stronger glue such as E 6000 for uses such as magnets where the glass itself might be pulled on more than it would be with jewelry.

Allow to dry, and you are finished!

These bezel trays will hold glass cabochons with the corresponding size to the tray. See below for directions on how to use these with the cabochons.

Shape: Round
Tray Size: 25mm
Color: Antique Bronze
Material: Metal Alloy
Number of Trays in Package: Four

Simply put a few dots of Diamond Glaze on the bottom of the glass cabochon, and press down firmly on the paper or other material you wish to use. Wipe any glue off the edge of the cabochon, and let dry for about 10 minutes.

Cut around the cabochon to remove the extra paper or other material.

Place a drop of glue in the bezel tray and set the cabochon into it. You can use a household glue such as tacky glue, or a much stronger glue such as E 6000 for uses such as magnets where the glass itself might be pulled on more than it would be with jewelry.

Allow to dry, and you are finished!

These bezel trays will hold glass cabochons with the corresponding size to the tray. See below for directions on how to use these with the cabochons.

Shape: Oval
Tray Size: 30mm x 40mm
Color: Antique Silver
Material: Metal Alloy
Number of Trays in Package: Four

Simply put a few dots of Diamond Glaze on the bottom of the glass cabochon, and press down firmly on the paper or other material you wish to use. Wipe any glue off the edge of the cabochon, and let dry for about 10 minutes.

Cut around the cabochon to remove the extra paper or other material.

Place a drop of glue in the bezel tray and set the cabochon into it. You can use a household glue such as tacky glue, or a much stronger glue such as E 6000 for uses such as magnets where the glass itself might be pulled on more than it would be with jewelry.

Allow to dry, and you are finished!